Thank you for your interest in our products. If you would like any further information, or if we can be of any further assistance, please complete the form below and we'll call you back.
Excalibur Scaffolding Ring bolt M12 X 150mm - Pack of 25
SKU
Excalibur Scaffolding Ring bolt M12 X 150mm - Pack of 25
£118.75
£142.50
- The Excalibur Scaffold Ring Tie is used for the fixing of a vertical scaffold tube to a structure – safely, conveniently and securely.
- A major advantage of this type of anchor lies in it being a once piece tie; when the project is finished and the scaffold struck, there is nothing left in the wall which may lead to further issues and the hole can be simply plugged.
- During manufacture, the eye part is closed by a weld and when tested gave an ultimate tensile failure load of 50kN. With a suggested safety factor of 5:1.
- The SWL of 10kN exceeds that of the scaffold clip and is on par with the load imposed on a brick wall.
- Supplied in boxes of 25
| Material | Boron Steel BS3111/9/2.1.A |
|---|---|
| Finish | Zinc & Yellow passivated as standard, or mechanical zinc |
| Other finishes | Other platings & finishes are available to special order subject to quantity |
| Tensile strength | 800N/mm2 Case hardened |
| Other sizes | Other lengths of all diameters are available to special order subject to quantity |
| Embedment concrete and brick | Minimum recommended is 4.5 × bolt diameter |
| Soft block | Minimum recommended is 75mm |
| Select Scaffold Board Size | Select Scaffold Board Size |
|---|
Write Your Own Review
